Flexible Metal Corner Drywall Joint Tape

አጭር መግለጫ:

Flexible metal corner tape is ideal for different corners and angles which are 90 degrees to prevent corner not damage. It has high strength and rustiness resistant.


የምርት ዝርዝር

የምርት መለያዎች

QUANJIANG, ታዋቂ የምርት ፊበርግላስ ቻይና ውስጥ የጋራ ወረቀት ቴፕ ጂፕሰም መሪ አምራቾች እና የዓለም አንዱ አቅራቢዎች መካከል አንዱ ነው ሊገዛ ወይም ቻይና ውስጥ የተሠራ የጅምላ የተበጁ ሻጋታው የጋራ ወረቀት ቴፕ እና የእኛን ፋብሪካ ከ ነፃ ናሙና ለማግኘት አቀባበል.

ጂፕሰም የጋራ የወረቀት ቴፕ

◆ የምርት መግለጫ

Flexible metal corner tape is ideal for different corners and angles which are 90 degrees to prevent corner not damage. It has high strength and rustiness resistant.
Product Specification:

Material: Paper tape with metal strip reinforced. Paper tape is reinforced fiber paper.

Metal has aluminum strip or galvanized steel strip or zinc finished metal strip.

Dimension: 5cmx25m, 5cmx30m or as requirements.

logo

 

◆Data Sheet:

Flexible Metal Corner Drywall Joint Tape

Metal strip
Metal type galvanized steel zinc finished metal aluminum
Metal width 11mm 11mm 10mm
Metal thickness 0.25mm±0.01mm 0.23mm±0.01mm 0.25mm±0.01mm
Distance between two strips 2mm±0.5mm 2mm±0.5mm 2mm±0.5mm
Paper tape
Paper unit weight 140g/m2±10g/m2 140g/m2±10g/m2 140g/m2±10g/m2
Paper thickness 0.2mm±0.01mm 0.2mm±0.01mm 0.2mm±0.01mm
Paper perforation type Pin type perforated Pin type perforated Laser perforation

 

Main Uses:

The flexible metal corner tape is easier to use than traditional metal corner bead.

It is a widely used tape in various applications, especially used for wall renovation, decoration and the like. It can be stuck to plaster boards, cements and other building materials completely and can prevent against the cracks of the wall and its corner.

 

Advantages and benefits:

* Excellent tensile strength

* Galvanized steel or Aluminum strip

* Anti-Corrosion and Rust-proof

* Easy cut and application

 

Instruction of Uses:

Cut flexible metal corner tape into one of the two strips with a knife to score and bend. The distance between your cuts will depend on how tight a radius you want to achieve. Apply generous coat of joint compound to a depth of 1/8”, covering both sides of the corner the same time. With the metal facing the wall, fold tape at the center margin and press firmly into the compound.

Once the corner is embedded, remove excess compound with taoing knife. After the first coat dries, sand lightly, apply finish coat and feather edges two inches beyond edges of the first coat. If needed apply a second coat 6”-10” wide on each side of corner. When dry, sand lightly is needed. The wide , galvanized steel strips act as a guide to ensure straight, reinforced angles for both “ inside” and “outside” corner needs.

◆ ዝርዝር

Material: Reinforced fiber paper

ቀለም: ነጭ

ልኬት: 2 "(5cm) x250 (76.2m), 50mmx75m, 50mmx150m ...

◆ ጥቅሞች እና ጥቅማጥቅሞች

* የቴፕ መቀዳደም, wrinkling ወይም ስትዘረጋ ለመከላከል ታክሏል የመሸከምና ጥንካሬ ጋር ልዩ fibered ወረቀት ከ የተመረተ ነው.

* የወረቀት ፋይበር የተሻለ መከተልን ከተወለወለ.

* የቴፕ ቀላል እና ትክክለኛ ጥግ መተግበሪያዎች ተሰልቶ-ተመሳሳይ ማዕከል crease አለው.

* ከፍተኛ እርጥብ እና ደረቅ ጥንካሬ ጋር, ደረቅ ክብደት ≥6.5KN / M, እርጥብ ያለው ጫና ያለው / መ ≥2.5KN ነው.

ሁለቴ ይነባበርና, የጋራ ጥንካሬ ከፍተኛ ነው * አነስተኛው ፋይበር ታደራለች ከ 50% በላይ አይደለም ያነሰ ነው.

* በጨረር perforation ወይም ሚስማር ዓይነት ቀዶ, permeability ውጤታማ ንደሚላላጥ እና ንብርብር ማስወገድ, መልካም ነው.

 

◆ ጥቅል

ነጭ ሳጥን ውስጥ እያንዳንዱ ጥቅልል.

የካርቶን ሳጥን ወይም pallet ጋር

6360547300970600046380770

 

◆ ዋና ይጠቀሙ

ነፍስንና ችግሮችን ለመፍታት, ቀላል ያጠናክሩ እና በጅማትና ማዕዘን ለመደበቅ ታስቦ

 

 

◆ ሌሎች

FOB ወደብ: Ningbo ወደብ

Small samples: free

የደንበኛ ንድፍ: አቀባበል

ትንሹ ትዕዛዝ 1 pallet

የመላኪያ ጊዜ: 15 ~ 25 ቀናት

የክፍያ ውል: ሰነዶች ወይም L 30% ቲ / ቲ የላቁ ውስጥ, 70% ቲ / ቲ በኋላ ቅጂ / ሲ

 


  • የቀድሞው:
  • ቀጣይ:

  • ለእኛ የእርስዎን መልዕክት ይላኩ:

    አጣሪ አሁን
    • * ምስጥር ጽሁፍ: በ እባክዎ ይምረጡ ቁልፍ

    ተዛማጅ ምርቶች

    አጣሪ አሁን
    • * ምስጥር ጽሁፍ: በ እባክዎ ይምረጡ የመኪና